ABSTRACT
Objective To investigate the distribution characteristics of Oncomelania hupensis in Guangxi Zhuang Autonomous Region, so as to provide insights into the assessment of the risk of schistosomiasis transmission and the scientific formulation of the schistosomiasis surveillance strategy. Methods From 2015 to 2019, a total of 19 national schistosomiasis surveillance sites were assigned in Guangxi Zhuang Autonomous Region, including 4 fixed sites and 15 mobile sites. Snail survey was performed by means of systematic sampling in combination with environmental sampling, and the infection of Schistosoma japonicum was detected by the crushing method combined with loop-mediated isothermal amplification (LAMP) assay. Results From 2015 to 2019, snail habitats were detected at areas of 17 040 to 39 527 m2, including 6 214 m2 emerging snail habitats and 16 563 m2 re-emerging snail habitats. The overall mean density of living snails was 0.019 2 snails/0.1 m2 and the occurrence of frames with snails was 1.11% in the national schistosomiasis surveillance sites; however, no S. japonicum infection was identified in snails. The area of snail habitats increased by 121.46% in the national surveillance sites in 2019 as compared to that in 2015; however, 50.34% (Z = −0.422, P > 0.05) and 42.85% (χ2 = 130.41, P < 0.01) reductions were seen in the overall means density of living snails and the occurrence of frames with snails. All snail habitats were distributed in the 4 fixed surveillance sites, and were mainly found in ditches, paddy fields and dry lands, with weeds as the primary vegetation type. Conclusions There are still risk factors leading to re-emergent transmission of schistosomiasis in Guangxi Zhuang Autonomous Region, such as local snail spread, and the monitoring of schistosomiasis remains to be reinforced to further consolidate the achievements of schistosomiasis elimination in the region.
ABSTRACT
Objective To establish a three-dimensional(3D) finite element model of cervical vertebrae (C1-7), and study its biomechanical properties under muscle force by cervical traction, so as to provide references for clinical treatment. Methods On the basis of nonlinear finite element model of normal cervical vertebrae and combined with clinical traction methods, cervical traction at the extension angle of 0°, 10°, 20°, 30°, 40° under the same traction weight, was simulated by finite element analysis (FEA) software to obtain and select the joint force and muscle force that were appropriate for FEA on the model. Results In the process of cervical extension by traction, under the muscle force, the average maximum equivalent stress of cervical vertebrae, intervertebral disc and uncovertebral joints increased by 4.86, 1.79, 0.69 MPa, respectively, and the average maximum relative displacement of cervical vertebrae in sagittal and vertical axis direction increased by 11.1, 1.26 mm, respectively. The biomechanical properties of cervical traction were similar to the FEA results reported in the literature. Conclusions Neck muscles play an active role in promoting the stress and displacement of cervical vertebrae, intervertebral discs and uncovertebral joints and it should be taken into consideration when performing cervical traction in clinic. In addition, the traction angle should not be too large: 0°-20° is generally recommended as a relatively safe angle range at the initial stage.
ABSTRACT
Objective To explore the biomechanical mechanisms of correlation between lumbar disc degeneration and sacroiliac joint disorder though investigating the biomechanical characteristics of lumbar disc degeneration with sacroiliac joint disorders. Methods One normal healthy volunteer and two patients with lumbar disc herniation and sacroiliac joint disorders (one was with sacrum disorders and the other was ilium disorders) were selected. Their CT data were collected to establish three corresponding lumbar-pelvis finite-element models, and their gait data were also simultaneously collected to drive the AnyBody musculoskeletal model. The muscle force around the lumbar and pelvis as well as the hip joint force were acquired as loading condition for finite element analysis. The stress changes in L4 and L5 intervertebral discs and sacroiliac joints of the patients and normal volunteer were compared. Results There was no significant difference in the stress of the two sides of L4, L5 disc and two sacroiliac joints in normal model, with a bimodal stress curve. However, in the models of sacrum disorders and ilium disorders, the bimodal stress curve peaks changed, even disappeared. The peak stress differences in left and right side of L4 disc were 0.55 MPa and 0.80 MPa, respectively, the peak stress differences in left and right side of L5 disc were 4.05 MPa and 2.08 MPa, respectively, and the peak stress differences in left and right side of sacroiliac joints were 0.96 MPa and 3.32 MPa, respectively. Conclusions The lumbar disc degeneration with sacroiliac joint disorder leads to the tilt of the body loading line, and sacroiliac joint disorder can aggravate the imbalances of stress on the body sides. The impact of sacroiliac joint dysfunction cannot be ignored in the treatment of lumbar disc herniation.
ABSTRACT
Objective To establish a three-dimensional(3D) finite element model of cervical vertebrae (C1-7),and study its biomechanical properties under muscle force by cervical traction,so as to provide references for clinical treatment.Methods On the basis of nonlinear finite element model of normal cervical vertebrae and combined with clinical traction methods,cervical traction at the extension angle of 0°,10°,20°,30°,40° under the same traction weight,was simulated by finite element analysis (FEA) software to obtain and select the joint force and muscle force that were appropriate for FEA on the model.Results In the process of cervical extension by traction,under the muscle force,the average maximum equivalent stress of cervical vertebrae,intervertebral disc and uncovertebral joints increased by 4.86,1.79,0.69 MPa,respectively,and the average maximum relative displacement of cervical vertebrae in sagittal and vertical axis direction increased by 1 1.1,1.26 mm,respectively.The biomechanical properties of cervical traction were similar to the FEA results reported in the literature.Conclusions Neck muscles play an active role in promoting the stress and displacement of cervical vertebrae,intervertebral discs and uncovertebral joints and it should be taken into consideration when performing cervical traction in clinic.In addition,the traction angle should not be too large:0.-20. is generally recommended as a relatively safe angle range at the initial stage.
ABSTRACT
Objective To explore the biomechanical mechanisms of correlation between lumbar disc degeneration and sacroiliac joint disorder though investigating the biomechanical characteristics of lumbar disc degeneration with sacroiliac joint disorders.Methods One normal healthy volunteer and two patients with lumbar disc herniation and sacroiliac joint disorders (one was with sacrum disorders and the other was with ilium disorders) were selected.Their CT data were collected to establish three corresponding lumbar-pelvis finite-element models,and their gait data were also simultaneously collected to drive the AnyBody musculoskeletal model.The muscle force around the lumbar and pelvis as well as the hip joint force were acquired as loading condition for finite element analysis.The stress changes in L4 and L5 intervertebral discs and sacroiliac joints of the patients and normal volunteer were compared.Results There was no significant difference in the stress of the two sides of L4,L5 disc and two sacroiliac joints in normal model,with a bimodal stress curve.However,in the models of sacrum disorders and ilium disorders,the bimodal stress curve peaks changed,even disappeared.The peak stress differences in left and right side of L4 disc were 0.55 MPa and 0.80 MPa,respectively,the peak stress differences in left and right side of L5 disc were 4.05 MPa and 2.08 MPa,respectively,and the peak stress differences in left and right side of sacroiliac joints were 0.96 MPa and 3.32 MPa,respectively.Conclusions The lumbar disc degeneration with sacroiliac joint disorder leads to the tilt of the body loading line,and sacroiliac joint disorder can aggravate the imbalances of stress on the body sides.The impact of sacroiliac joint dysfunction cannot be ignored in the treatment of lumbar disc herniation.
ABSTRACT
Objective To establish a three-dimensional(3D) finite element model of cervical vertebrae (C1-7),and study its biomechanical properties under muscle force by cervical traction,so as to provide references for clinical treatment.Methods On the basis of nonlinear finite element model of normal cervical vertebrae and combined with clinical traction methods,cervical traction at the extension angle of 0°,10°,20°,30°,40° under the same traction weight,was simulated by finite element analysis (FEA) software to obtain and select the joint force and muscle force that were appropriate for FEA on the model.Results In the process of cervical extension by traction,under the muscle force,the average maximum equivalent stress of cervical vertebrae,intervertebral disc and uncovertebral joints increased by 4.86,1.79,0.69 MPa,respectively,and the average maximum relative displacement of cervical vertebrae in sagittal and vertical axis direction increased by 1 1.1,1.26 mm,respectively.The biomechanical properties of cervical traction were similar to the FEA results reported in the literature.Conclusions Neck muscles play an active role in promoting the stress and displacement of cervical vertebrae,intervertebral discs and uncovertebral joints and it should be taken into consideration when performing cervical traction in clinic.In addition,the traction angle should not be too large:0.-20. is generally recommended as a relatively safe angle range at the initial stage.
ABSTRACT
Objective To explore the biomechanical mechanisms of correlation between lumbar disc degeneration and sacroiliac joint disorder though investigating the biomechanical characteristics of lumbar disc degeneration with sacroiliac joint disorders.Methods One normal healthy volunteer and two patients with lumbar disc herniation and sacroiliac joint disorders (one was with sacrum disorders and the other was with ilium disorders) were selected.Their CT data were collected to establish three corresponding lumbar-pelvis finite-element models,and their gait data were also simultaneously collected to drive the AnyBody musculoskeletal model.The muscle force around the lumbar and pelvis as well as the hip joint force were acquired as loading condition for finite element analysis.The stress changes in L4 and L5 intervertebral discs and sacroiliac joints of the patients and normal volunteer were compared.Results There was no significant difference in the stress of the two sides of L4,L5 disc and two sacroiliac joints in normal model,with a bimodal stress curve.However,in the models of sacrum disorders and ilium disorders,the bimodal stress curve peaks changed,even disappeared.The peak stress differences in left and right side of L4 disc were 0.55 MPa and 0.80 MPa,respectively,the peak stress differences in left and right side of L5 disc were 4.05 MPa and 2.08 MPa,respectively,and the peak stress differences in left and right side of sacroiliac joints were 0.96 MPa and 3.32 MPa,respectively.Conclusions The lumbar disc degeneration with sacroiliac joint disorder leads to the tilt of the body loading line,and sacroiliac joint disorder can aggravate the imbalances of stress on the body sides.The impact of sacroiliac joint dysfunction cannot be ignored in the treatment of lumbar disc herniation.
ABSTRACT
AIM: To observe the effects of scleral buckling surgery for retinal detachment under microscope and under indirect ophthalmoscope. METHODS: Forty - six patients ( 46 eyes ) with rhegmatogenous retinal detachment were retrospectively analyzed. Twenty-six patients received surgeries under microscope was retrospectively analyzed and compared to that of 20 patients who received surgeries under indirect ophthalmoscope by the same operator. RESULTS: No statistical difference was found in patients' operation method choice, including condensation reaction reattachment situation and the retina reset operation at a time ( P> 0. 05 ). The best corrected visual acuity of microscopic group after 1mo of operation was better than before operation, and the improving rate of vision after operation was higher than that of the traditional group (P CONCLUSION:The curative effect of external approach microsurgery has the similar efficacy with the conventional external approach surgery, and gets better visual acuity.
ABSTRACT
Objective To understand the main causes of death and the potential years of life lost (PYLL) of residents living in Yubei District of Chongqing, so as to provide evidence for disease control and health promotion. Methods The data of the death cases were classified according to ICD-10 method and were subjected to analysis by DeathReg2005 software. The characteristics of death of our population were analyzed using the following parameters: the crude mortality, proportions of death due to different reasons, order of death causes and the PYLL, etc. Results The crude death rate of residents in our study was 605.02 per 100 000 in 2012, with the standardized death rate being 440.72 per 100 000; and the mortality was higher in males than in females(χ2=227.87,P<0.001).The top five causes of deaths in order were: circular system diseases, malignant tumors, respiratory system diseases, injury and poisoning, and digestive system diseases; these 5 causes contributed to 95.15% of all death causes. The top six causes of PYLL in order were: malignant tumors, injury and poisoning, circular system diseases, respiratory system diseases, perinatal system diseases, and digestive system diseases. The main causes of death among different ages have their own characteristics. Conclusion The predominant causes of death among residents in our study include chronic non-infectious diseases (circular system diseases and malignant tumors); injuries and poisoning, especially death due to traffic accident, are the major causes among young adults. Appropriate preventive and interventional measures should be taken based on the death causes of residents.
ABSTRACT
<p><b>OBJECTIVE</b>To evaluate the effect of epidermal growth factor receptor tyrosine kinase inhibitor, gefitinib, on the expression of α-smooth muscle actin (α-SMA) in mice with lung fibrosis induced by bleomycin.</p><p><b>METHODS</b>Thirty male BALB/c mice were randomly divided into control, bleomycin, and bleomycin plus gefitinib groups. The mice in the control group were subjected to intratracheal administration of normal saline, those in bleomycin group received bleomycin (3 mg/kg) intratracheally, and those in bleomycin plus gefitinib group received oral gefitinib (20 mg/kg administering) plus intratracheal bleomycin administration. All the mice were sacrificed 14 days after the treatments, and the left lung was examined pathologically with HE staining and Masson staining and also immunohistochemically for assay of the total EGFR, phosphorylated EGFR and α-SMA. The right lungs were sampled for RT-PCR to detect the mRNA levels of α-SMA.</p><p><b>RESULTS</b>Gefitinib administration lessened lung fibrosis induced by bleomycin and significantly reduced lung collagen accumulation. The phosphorylation of EGFR in the pulmonary mesenchymal cells and epithelial cells and the expression levels of α-SMA mRNA and protein were inhibited by gefitinib treatment in mice with intratracheal administration of bleomycin (P<0.05).</p><p><b>CONCLUSION</b>Gefitinib offers protection against lung fibrosis induced by bleomycin in mice probably by inhibiting the downstream signals of EGFR and by downregulating the expression of α-SMA.</p>
Subject(s)
Animals , Male , Mice , Actins , Metabolism , Bleomycin , Lung , Metabolism , Pathology , Mice, Inbred BALB C , Pulmonary Fibrosis , Metabolism , Pathology , Quinazolines , Pharmacology , RNA, Messenger , Genetics , ErbB Receptors , MetabolismABSTRACT
<p><b>OBJECTIVE</b>To investigate the efficacy of the double-balloon and triple-channel catheter (DBTC) in the treatment of chronic bacterial prostatitis (CBP).</p><p><b>METHODS</b>One hundred and three CBP patients were randomly assigned to three different groups and received three different therapies, respectively: 1. 61 cases by transurethral perfusion and drainage with antibiotics with DBTC catheter; 2. 29 cases by intravenous antibiotics, and 3. 13 cases by transurethral irrigation with 0.9% saline. The lecithin, white blood cells (WBC) in expressed prostatic secretion (EPS) and Meares-Stamey's test fractionary urine culture pre- and post-therapies were compared.</p><p><b>RESULTS</b>The improvement rates of clinical symptoms and lecithin corpuscles were 81.9% and 68.9%, respectively. And the decline rate of WBC and bacteriological efficacy rate were 75.4% and 91.8%, respectively. There was a significant statistical difference between the DBTC group and the intravenous group in the lecithin, WBC and bacterial culture (P < 0.05, < 0.01 and < 0.01, respectively), and so was there between the saline group and the intravenous group in the decline of WBC(chi 2 = 5.6, P < 0.05), but with no difference in lecithin and bacterial culture. Among 61 patients treated with DBTC, 3 developed mild allergic reaction in urethra.</p><p><b>CONCLUSIONS</b>Transurethral DBTC has a better clinical efficacy than traditional intravenous treatment for CBP. DBTC perfusion combined with other hypurgia holds obvious advantages of being safe, effective, easy and repeatable in the treatment of CBP.</p>